Engaged aircraft or through properly designed, sprinkler-type, chemigation equipment (See Chemigation Application directions below). Thorough and uniform coverage of plants, with direct contact of the spray mixture to the target pests,is required for satisfactory control. Avoid application procedures where thorough coverage of plant is not possible. Applications made with less than thorough coverage may result in slower activity and/or less overall control from a single application.

Unless specified otherwise in the crop-specific recommended application section, Tombstone may be applied by the following methods:Foliar Spray Application Foliar applications may be made using properly calibrated ground sprayers, fixed or rotary-winan application made with higher gallonages. Refer to Spray Drift Reduction Management section for application guidelines on minimizing drift from all application methods.Ground applications should be made in a minimum of 10 gallons/A unless specified otherwise in crop-specific recommended application section. Aerial applications should be made in a minimum of 2 gallons/A unless specified otherwise in crop-specific recommended application section, however 5 gallons/A are recommended. See crop-specific gallonage requirements. Aerial applications made to dense canopies may not provide sufficient coverage of lower leaves or interior plant portions to provide pest control. Higher labeled rates of Tombstone may be necessary for aerial applications.
Chemigation applications (See Chemigation Application directions below) should be made as concentrated as possible. For best results apply at 100% inpuVtravel speed, for center pivots or 0.1 inch (2,716 gallons) up to 0.15 inch (4,073 gallons) of water/A, for other systems.

APPLICATION INSTRUCTIONS
Unless specified otherwise in the crop-specific recommended application section, Tombstone may be applied by the following methods:
Foliar Spray Application
Foliar applications may be made using properly calibrated ground sprayers, fixed or rotary-winged aircraft or through properly designed, sprinkler-type, chemigation equipment (See Chemigation Application directions below). Thorough and uniform coverage of plants, with direct contact of the spray mixture to the target pests,
is required for satisfactory control.Avoid application procedures where thorough coverage of plant is not possible. Applications made with less than thorough coverage may result in slower activity and/or less overall control from a single application than
an application made with higher gallonages. Refer to Spray Drift Reduction Management section for application guidelines on minimizing drift from all application methods.Ground applications should be made in a minimum of 10 gallons/A unless specified otherwise in crop-specific recommended application section. Aerial applications should be made in a minimum of 2 gallons/A unless specified otherwise in crop-specific recommended application section, however 5 gallons/A are recommended. See crop-specific gallonage requirements. Aerial applications made to dense canopies may not provide sufficient coverage of lower leaves or interior plant portions to provide pest control. Higher labeled rates of Tombstone may be necessary for aerial applications.
Chemigation applications (See Chemigation Application directions below) should be made as concentrated
as possible. For best results apply at 100% inpuVtravel speed, for center pivots or 0.1 inch (2,716 gallons)up to 0.15 inch (4,073 gallons) of water/A.